|
New small hydraulic parts |
| |
|
After a long time we would like to inform you about some newly developed products from the "Mini-" category.
These products are made entirely of stainless steel/FPM and are suitable for various media and temperatures.
Because we haven't just only been lazy in the meantime, it's also worth taking a look at our Homepage, where you can also find new products and updates from other sections. |
| |
|
Mini - Screw Plugs |
With these small screw plugs, the insertion bevel of the O-ring also serves as a contour for the countersunk head of the screw.
Standard thread sizes: M5, M6, M7.
The screws have a TORX® drive for fastening. |
|
|
| |
|
Features |
- Suitable for high pressures and temperatures
- Detachable and reusable
- Completely countersunkable
- No material distortion in the edge area
- No special tools required |
|
|
| |
|
Mini - Non Return Valve |
Available for both flow directions.
As screw-in valve M6.
The O-ring is not absolutely necessary.
This is only necessary if the drilling angle is 170°-180°.
Can also be used for over 200°C without the O-ring. |
|
|
| |
|
Features |
-Suitable for high pressures and temperatures
- Detachable and reusable
- Simple mounting hole
- Space-saving installation
- No special tools required |
|
|
| |
|
Mini - Safety Valve |
Thread size M8x1.
Pressure relief valve with individual pressure presetting.
Due to the small nominal diameter, this valve cannot be used for constant pressure regulation. |
|
|
| |
|
Features |
- Suitable for high pressures and temperature
- Detachable and reusable
- Simple mounting hole
- Space-saving installation
- Individual pressure preset |
|
|
| |
|
Here are a few more tips on products that thematically match the above.
Of course we have other new products from the areas of diaphragm accumulators, valves and clamping elements.
|
| |
|
Insert-Non Return Valve |
|
Matching the check valve mentioned above, there is also a knock-in variant for the D5 bore, with a setting cone. |
|
|
| |
|
Special Bleed Screws |
We would also like to point out our standard- as well as our special bleed screws.
Furthermore we have the following sizes in stock: M10x1, M12x1, G1/8 Torx. |
|
|
| |
|
Screw-In Filters |
Here, we have expanded the products to include screw-in filters, too.
Available from M6 - G1 in 316L INOX. |
|
|
| |
|
ScanWill Intensifiers |
In addition to our own products, we also sell the pressure boosters from Denmark.
Here we have expanded the portfolio.
These products are not from stainless steel. |
|
|
| |
Inosol GmbH
Frankfurter Str. 18, 35315 Homberg (Ohm), Germany
| |
|
